This menu allows you to assign outputs to groups. Output groups can be assigned to other areas of programming, such as Output Options or Alarm Action in Zone Information, just like individual outputs. This allows all outputs in the group to turn on or off based on the selected programming option.
Program the Panel at the Keypad
-
Press 6653 (PROG), then CMD at the keypad to enter the PROGRAMMER menu.
-
Press CMD until you see OUTPUT GROUPS, then press any select key or area.
-
Configure the following options as needed:
|
Keypad Display |
Description |
|---|---|
Group Number
GROUP NO: - |
Enter a group number from 1 to 20. You can program up to 20 different groups. |
Group Name
GROUP NAME X |
Press any select key or area, then enter up to 32 characters for the group name. |
Output Number
OUTPUT NO: 1 |
Enter the output number. Refer to the Panel Quick Reference table for available output numbers. You can assign up to 8 outputs per group. An output group can also be assigned as an output within another output group. Output groups 1-10 can be assigned to a user group for applications such as elevator control. Output groups 11-20 cannot be assigned to a user group and are intended for installation applications such as special lighting. For more information, see Output Group in the XR650 User Guide. |
-
When you are finished, continue programming additional menus as needed, or press CMD until STOP displays, then press any select key or area to save the panel programming.
Program the Panel in Dealer Admin
Before You Begin
-
Verify the panel is connected to network
-
Log in to Dealer Admin.
-
Go to Customers, then select the System Name.
-
Go to Programming > Output Groups.
-
Select + Add Output Group.
-
Configure the following options as needed:
|
Dealer Admin Field |
Description |
|---|---|
Output Group Number
|
Enter a group number from 1 to 20. You can program up to 20 different groups. |
Output Group Name
|
Enter up to 32 characters for the group name. |
Output Number 1-8
|
Enter the output number. Refer to the Panel Quick Reference table for available output numbers. You can assign up to 8 outputs per group. An output group can also be assigned as an output within another output group. Output groups 1-10 can be assigned to a user group for applications such as elevator control. Output groups 11-20 cannot be assigned to a user group and are intended for installation applications such as special lighting. For more information, see Output Group in the XR650 User Guide. |
-
When you are finished, select one of the following options:
-
If you are finished with all programming — Select Send All Changes at the top of the screen. This sends all programming changes to the panel.
-
If you are finished programming Output Groups only — Select the More icon
-