Remote Options

Remote Key

Enter a remote key of up to 16 characters.

Remote Link and Dealer Admin should be given the correct key to the panel before being allowed any remote functions. All panels are shipped from the factory with the key preset as blank. This can be an optional or required setting.

Remote Disarm

YES (default) — Allow the panel to be disarmed remotely.

NO — Disable remote disarming.

Network Programming Port

Enter the programming port number that identifies the port used to communicate messages to the panel. The default is 2443.

Cell APN

Enter the first APN (Access Point Name). This allows an access point for cellular communication and is used to connect to a DNS network. The APN may contain two lines of 16 characters that are equal up to 32 characters. The default is SECURECOM400.

Entré Connection

NONE (default) — Disable this option.

NET (network) — Use network to connect to Entré.

CEL (cellular) — Use cellular to connect to Entré.

Entré Incoming TCP Port

📍 Displays if Entré Connection is Network

Enter the programming port number for the incoming Entré connection to identify the port used to communicate messages to and from the Entré software. The default is 2143.

The port cannot be the same port programmed in the Network Programming Port.

Use Entré Host Name

This option allows you to choose a host name as an alternative to an IP address, which allows the Entré Server to retain connection and send network messages if the IP address changes without the use of a static IP address.

NO (default) — Set an IPv6 or IP address.

YES — Use a host name.

Entré Host Name

📍 Displays if Use Entré Host Name is set to Yes

Enter the Entré Host Name. The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

Entré IPv6

📍 Displays if Use Entré Host Name is set to No

NO (default) — Set an IP address.

YES — Set an IPv6 address.

Entré IPv6 Address

📍 Displays if Entré IPv6 is set to Yes

Enter the IPv6 Address where the panel sends network messages. The Entré IPv6 Address should be unique and cannot be duplicated on the network.

Enter all 32 digits and leave out the periods.

Entré IP Address

📍 Displays if Use Entré Host Name is set to No and Entré IPv6 is set to No

Enter the Entré IP address where the panel sends network messages. The Entré IP Address should be unique and cannot be duplicated on the network.

Enter all 12 digits and leave out the periods.

Entré Outbound TCP Port

📍 Displays if Entré Connection is set to Network or Cellular

Enter the programming port number for the outbound Entré connection to identify the port used to communicate messages to the Entré software. The default is 2443.

Entré Backup Connection

📍 Displays if Entré Connection is set to Network or Cellular

NONE (default) — Disable this option.

NET (network) — Use network as the backup connection to Entré.

CEL (cellular) — Use cellular as the backup connection to Entré.

Entré Backup Host Name

📍 Displays if Use Entré Host Name is set to Yes

Enter the backup host name where the panel sends network messages if the first Entré connection fails.

The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

Entré Backup IPv6 Address

📍 Displays if Entré IPv6 is set to Yes

Enter the backup IPv6 Address where the panel sends network messages. The Entré IPv6 Address should be unique and cannot be duplicated on the network.

Enter all 32 digits and leave out the periods.

Entré Backup IP Address

📍 Displays if Use Entré Host Name is set to No and Entré IPv6 is set to No

Enter the Entré IP address where the panel sends network messages. The Entré IP Address should be unique and cannot be duplicated on the network.

Enter all 12 digits and leave out the periods.

Entré Backup TCP Port

📍 Displays if Entré Backup Connection is set to Network or Cellular

Enter the backup programming port number for the outbound Entré connection if the connection to the primary IP fails. The default is 2443.

Entré Arm/Disarm Reports

NO (default) — Disable this option.

YES — Allow the panel to send arming, disarming, and Late to Close events, including the following information:

• Area number

• Area name

• Area action

• User number

• User name

Entré Zone Reports

NO (default) — Disable this option.

YES — Allow the panel to send changes for active zone statuses, including the following information:

• Zone number

• Zone name

• Zone type

• Zone action

• User number

• Area name

If performing a Walk Test, Zone Verify and Zone Fail messages are sent for each zone.

Entré User Commands Reports

NO (default) — Disable this option.

YES — Allow the panel to send user code changes, schedule changes, and door access denied events.

Entré Door Access Reports

NO (default) — Disable this option.

YES — Allow the panel to send door access activity, including the following information:

• Door number

• User number

• User name

• Time

• Date

Entré Supervisory Reports

NO (default) — Disable this option.

YES — Allow the panel to send system monitor reports, such as AC, battery, and system event reports. Supervisory reports also send the following messages:

• Abort

• Exit Error

• Ambush

• System Recently Armed

• Alarm Bell Silenced

• Unauthorized Entry

• Late to Close

To send these reports to Entré, enable this feature.

Entré Check-in Minutes

📍 Displays if Entré Connection is set to Network or Cellular

Enter the number of minutes (3-240) that check-in messages are sent over the Entré connection. Enter 0 to disable this option.

Entré Passphrase

📍 Displays if Entré Connection is set to Network or Cellular

Enter a passphrase to use encryption on Entré incoming and outgoing ports.

The passphrase can be up to 8-16 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.), asterisk (*), number (#), and space. The passphrase should be unique and cannot be duplicated on the network.

API Port Connection

NONE (default) — Disable this option.

NET (network) — Use network to connect to the API.

CEL (cellular) — Use cellular to connect to the API.

API Incoming TCP Port

📍 Displays if API Port Connection is Network

Enter the programming port number for the incoming connection to identify the port used to communicate messages to and from the API software. The default is 8143.

The port cannot be the same port programmed in the Network Programming Port.

Use API Host Name

📍 Displays if API Port Connection is Network

This option allows you to choose a host name as an alternative to an IP address, which allows the API to retain connection and send network messages if the IP address changes without the use of a static IP address.

NO (default) — Set an IP address.

YES — Use a host name.

API Host Name

📍 Displays if Use API Host Name is set to Yes

Enter the API Host Name. The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

API IP Address

📍 Displays if Use API Host Name is set to No

Enter the API IP address where the panel sends network messages. The IP Address should be unique and cannot be duplicated on the network.

Enter all 12 digits and leave out the periods.

API Outbound TCP Port

📍 Displays if API Connection is set to Network

Enter the programming port number for the outbound API connection to identify the port used to communicate messages to the API software. The default is 8443.

API Port Backup Connection

📍 Displays if API Backup Connection is Network or Cellular

NONE (default) — Disable this option.

NET (network) — Use network as the backup connection to the API.

CEL (cellular) — Use cellular as the backup connection to the API.

API Backup Host Name

📍 Displays if Use API Host Name is set to Yes

Enter the backup host name where the panel sends network messages if the first API connection fails.

The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

API Backup IP Address

📍 Displays if Use API Host Name is set to No

Enter the API IP address where the panel sends network messages. The IP Address should be unique and cannot be duplicated on the network.

Enter all 12 digits and leave out the periods.

API Backup TCP Port

📍 Displays if API Backup Connection is Network

Enter the backup programming port number for the outbound API connection if the connection to the primary IP fails. The default is 8443.

API Arm/Disarm Reports

NO (default) — Disable this option.

YES — Allow the panel to send arming, disarming, and Late to Close events, including the following information:

• Area number

• Area name

• Area action

• User number

• User name

API Zone Reports

NO (default) — Disable this option.

YES — Allow the panel to send changes for active zone statuses, including the following information:

• Zone number

• Zone name

• Zone type

• Zone action

• User number

• Area name

If performing a Walk Test, Zone Verify and Zone Fail messages are sent for each zone.

API User Commands Reports

NO (default) — Disable this option.

YES — Allow the panel to send user code changes, schedule changes, and door access denied events.

API Door Access Reports

NO (default) — Disable this option.

YES — Allow the panel to send door access activity, including the following information:

• Door number

• User number

• User name

• Time

• Date

API Supervisory Reports

NO (default) — Disable this option.

YES — Allow the panel to send system monitor reports, such as AC, battery, and system event reports. Supervisory reports also send the following messages:

• Abort

• Exit Error

• Ambush

• System Recently Armed

• Alarm Bell Silenced

• Unauthorized Entry

• Late to Close

To send these reports to the API, enable this feature.

API Passphrase

📍 Displays if API Port Connection is set to Network or Cellular

Enter a passphrase to use encryption on API incoming and outgoing ports.

The passphrase can be up to 8-16 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.), asterisk (*), number (#), and space. The passphrase should be unique and cannot be duplicated on the network.

App Key

Enter the 8-digit App Key you can find at Settings > Dealer > App Key in Dealer Admin.

This option is a security feature for the Virtual Keypad app used only when EASYconnect is set as the communication type in Dealer Admin.

This communication option is used to eliminate the need for a static IP address programmed in Network Options.

Remote Key

The Remote Key is used to authenticate remote communication to the panel.

Remote Disarm

Toggle ON to allow the panel to be disarmed remotely.

Toggle OFF to disable remote disarming.

Network Programming Port

Enter the programming port number that identifies the port used to communicate messages to the panel. The default is 02443.

APN

Enter the first APN (Access Point Name). This allows an access point for cellular communication and is used to connect to a DNS network. The default is SECURECOM400.

App Key

The App Key is generated automatically. Enter a new key to change the current one. This option is a security feature for the Virtual Keypad app used only when EASYconnect is set as the communication type in Dealer Admin.

This communication option is used to eliminate the need for a static IP address programmed in Network Options.

Entré

Entré Connection

None (default) — Disable this option.

Network — Use network to connect to Entré.

Cell — Use cellular to connect to Entré.

Use Entré Host Name

📍 Displays if Entré Connection is Network or Cell

This option allows you to choose a host name as an alternative to an IP address, which allows the Entré Server to retain connection and send network messages if the IP address changes without the use of a static IP address.

Toggle ON to use a host name.

Toggle OFF to set an IPv6 or IP address.

Entré Host Name

📍 Displays if Use Entré Host Name is toggled ON

Enter the Entré Host Name. The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

Entré Incoming TCP Port

📍 Displays if Entré Connection is Network

Enter the programming port number for the incoming Entré connection to identify the port used to communicate messages to and from the Entré software. The default is 02143.

The port cannot be the same port programmed in the Network Programming Port.

Entré IPv6

📍 Displays if Entré Connection is set to Network and Use Entré Host Name is toggled OFF

Toggle ON to set an IPv6 address.

Toggle OFF to set an IP address.

Entré IPv6 Address

📍 Displays if Entré IPv6 is toggled ON

Enter the IPv6 Address where the panel sends network messages. The Entré IPv6 Address should be unique and cannot be duplicated on the network.

Entré IP Address

📍 Displays if Use Entré Host Name is toggled OFF and Entré IPv6 is toggled OFF

Enter the Entré IP address where the panel sends network messages. The Entré IP Address should be unique and cannot be duplicated on the network.

Entré Outbound TCP Port

📍 Displays if Entré Connection is Network or Cellular

Enter the programming port number for the outbound Entré connection to identify the port used to communicate messages to the Entré software. The default is 02443.

Entré Backup Connection

📍 Displays if Entré Connection is set to Network or Cellular

None (default) — Disable this option.

Network — Use network as the backup connection for Entré.

Cellular — Use cellular as the backup connection for Entré.

Entré Backup Host Name

📍 Displays if Use Entré Host Name is toggled ON

Enter the backup host name where the panel sends network messages if the first Entré connection fails.

The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

Entré Backup IPv6 Address

📍 Displays if Entré IPv6 is toggled ON

Enter the backup IPv6 Address where the panel sends network messages. The Entré IPv6 Address should be unique and cannot be duplicated on the network.

Entré Backup IP Address

📍 Displays if Use Entré Host Name is toggled OFF and Entré IPv6 is toggled OFF

Enter the Entré IP address where the panel sends network messages. The Entré IP Address should be unique and cannot be duplicated on the network.

Entré Backup TCP Port

📍 Displays if Entré Backup Connection is set to Network or Cellular

Enter the backup programming port number for the outbound Entré connection if the connection to the primary IP fails. The default is 02443.

Entré Arm/Disarm Reports

Toggle ON to allow the panel to send arming, disarming, and Late to Close events, including the following information:

• Area number

• Area name

• Area action

• User number

• User name

Toggle OFF to disable this option.

Entré Zone Reports

Toggle ON to allow the panel to send changes for active zone statuses, including the following information:

• Zone number

• Zone name

• Zone type

• Zone action

• User number

• Area name

If performing a Walk Test, Zone Verify and Zone Fail messages are sent for each zone.

Toggle OFF to disable this option.

Entré User Command Reports

Toggle ON to allow the panel to send user code changes, schedule changes, and door access denied events.

Toggle OFF to disable this option.

Entré Door Reports

Toggle ON to allow the panel to send door access activity, including the following information:

• Door number

• User number

• User name

• Time

• Date

Toggle OFF to disable this option.

Entré Supervisory Reports

Toggle ON to allow the panel to send system monitor reports, such as AC, battery, and system event reports. Supervisory reports also send the following messages:

• Abort

• Exit Error

• Ambush

• System Recently Armed

• Alarm Bell Silenced

• Unauthorized Entry

• Late to Close

To send these reports to the Entré, enable this feature.

Toggle OFF to disable this option.

Entré Check-in Minutes

📍 Displays if Entré Connection is Network or Cell

Enter the number of minutes (3-240) that check-in messages are sent over the Entré connection. Enter 0 to disable this option.

Entré Passphrase

📍 Displays if Entré Connection is Network or Cell

Enter a passphrase to use encryption on Entré incoming and outgoing ports.

The passphrase can be up to 8-16 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.), asterisk (*), number (#), and space. The passphrase should be unique and cannot be duplicated on the network.

API Port Connection

API Port Connection

None (default) — Disable this option.

Network — Use network for the API connection.

Cellular — Use cellular for the API connection.

API Incoming TCP Port

📍 Displays if API Port Connection is Network

Enter the programming port number for the incoming connection to identify the port used to communicate messages to and from the API software. The default is 8143.

The port cannot be the same port programmed in the Network Programming Port.

Use API Host Name

📍 Displays if API Port Connection is Network

This option allows you to choose a host name as an alternative to an IP address, which allows the API to retain connection and send network messages if the IP address changes without the use of a static IP address.

Toggle ON to use a host name.

Toggle OFF to set an IP address.

API Host Name

📍 Displays if Use API Host Name is toggled ON

Enter the API Host Name. The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

API IP Address

📍 Displays if Use API Host Name is toggled OFF

Enter the API IP address where the panel sends network messages. The IP Address should be unique and cannot be duplicated on the network.

API Outbound TCP Port

📍 Displays if API Connection is Network

Enter the programming port number for the outbound API connection to identify the port used to communicate messages to the API software. The default is 8443.

API Port Backup Connection

📍 Displays if API Backup Connection is Network or Cell

None (default) — Disable this option.

Network — Use network as the backup connection to the API.

Cell — Use cellular as the backup connection to the API.

API Backup Host Name

📍 Displays if Use API Host Name is toggled ON

Enter the backup host name where the panel sends network messages if the first API connection fails.

The host name can be up to 63 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.).

The host name should be unique and cannot be duplicated on the network. If you enter a host name, you do not need to enter an IP address.

API Backup IP Address

📍 Displays if Use API Host Name is toggled OFF

Enter the API IP address where the panel sends network messages. The IP Address should be unique and cannot be duplicated on the network.

API Backup TCP Port

📍 Displays if API Backup Connection is Network

Enter the backup programming port number for the outbound API connection if the connection to the primary IP fails. The default is 8443.

API Arm/Disarm Reports

Toggle ON to allow the panel to send arming, disarming, and Late to Close events, including the following information:

• Area number

• Area name

• Area action

• User number

• User name

Toggle OFF to disable this option.

API Zone Reports

Toggle ON to allow the panel to send changes for active zone statuses, including the following information:

• Zone number

• Zone name

• Zone type

• Zone action

• User number

• Area name

If performing a Walk Test, Zone Verify and Zone Fail messages are sent for each zone.

Toggle OFF to disable this option.

API User Command Reports

NO (default) — Disable this option.

YES — Allow the panel to send user code changes, schedule changes, and door access denied events.

Toggle OFF to disable this option.

API Door Reports

Toggle ON to allow the panel to send door access activity, including the following information:

• Door number

• User number

• User name

• Time

• Date

Toggle OFF to disable this option.

API Supervisory Reports

Toggle ON to allow the panel to send system monitor reports, such as AC, battery, and system event reports. Supervisory reports also send the following messages:

• Abort

• Exit Error

• Ambush

• System Recently Armed

• Alarm Bell Silenced

• Unauthorized Entry

• Late to Close

To send these reports to the API, enable this feature.

Toggle OFF to disable this option.

API Passphrase

📍 Displays if API Port Connection is Network or Cell

Enter a passphrase to use encryption on API incoming and outgoing ports.

The passphrase can be up to 8-16 characters and include the following: a-z, A-Z, 0-9, hyphen (-), and period (.), asterisk (*), number (#), and space. The passphrase should be unique and cannot be duplicated on the network.