Key Fobs

Zone Number

Enter the key fob zone number (400-499).

Key Fob User Number

Enter the user number from 1 to 309999 used to identify the key fob user. The default is blank.

Key Fob Serial Number

Enter the 8-digit serial number found on the key fob.

Key Fob Transmitter Supervision Time

Enter the Supervision Time (0, 60, or 240) required for the key fob zone. The default is 0, which indicates an unsupervised transmitter.

The key fob automatically checks in at least once during this time or a missing condition is indicated for that zone.

When the panel is reset or a receiver is installed or powered down and powered up, the supervision timer restarts for all wireless zones.

Number of Key Fob Buttons

Enter the number of buttons (1, 2, or 4) on the key fob.

If the key fob is a 1-button model, programming continues at Button Action. Default button assignment for 1-button key fobs is a Panic alarm with no output assigned.

Key Fob Button Selection

📍 Displays if you are programming a 2- or 4-button key fob

Select one of the following buttons to program the action when pressed:

TOP — Arming with no areas assigned

BTM — Disarming with no areas assigned

4-Button Only

LFT (Left) — Panic alarm with no output assigned

RGT (Right) — Arming with Area 1 assigned

Button Action

Select one of the following button actions for an individual key fob button:

• ARM —Arm selected areas and force arm bad zones.

• DIS (Disarm) — Disarm selected areas.

• TGL (Toggle) — Toggle arm/disarm for selected areas and force arm bad zones when arming

• STA (Status) — Allow the key fob LED to indicate the arm/disarm status of the system

• PN (Panic) — Trigger a Panic zone type alarm with no restoral.

• PN2 (Panic 2) —Trigger a Panic zone type alarm with no restoral when pressed simultaneously with any other Panic 2 button. No action occurs when pressed alone.

• EM (Emergency) — Trigger an Emergency zone type alarm with no restoral.

• EM2 (Emergency 2) — Trigger an Emergency zone type alarm with no restoral when pressed simultaneously with any other Emergency 2 button. No action occurs when pressed alone.

• OUT (Output) — Allows an output to turn on Steady, Pulse, Momentary, Toggle, or Off.

• RST (Sensor Reset) — Allow panel to perform a standard Sensor Reset.

• UN (Unused): Perform no action.

Button Press Time

Select the amount of time the user should press the button before the key fob sends a message to the receiver.

SHORT — Press the button for a 1/2 second to send the message to the receiver.

LONG — Press the button for 2 seconds to send the message to the receiver.

Arm/Disarm Areas

Enter the area number that is armed or disarmed according to the key fob button programming.

To arm or disarm selected areas, the user’s Group assigned to the user number needs to have the same area numbers selected. Any area may be selected at Arm/Disarm Areas but only matching area numbers are armed or disarmed when the specific button is pressed.

When more areas are selected at Arm/Disarm Areas than are authorized in the user’s Group, the user can be given access authority to additional areas through the without requiring additional panel programming.

Output Number

📍 Displays if Action is Panic, Panic 2 Btn, Emergency, Emergency 2 Btn, or Output

Enter the Output to operate when the button is pressed.

Output Action

Select one of the following output actions for the selected output number:

• STD (Steady) — The output turns on and remains on.

• PLS (Pulse) — The output alternates 1 second on and 1 second off.

• MOM (Momentary) — The output turns on once for 1 second.

• TGL (Toggle) — The output alternates between the on state and off state. Each button press toggles the output state.

• OFF — The output is turned off. The output may turn off according to other programming, such as another button press, a zone action, or a schedule.

Keypad Display

Description

Key Fob Number

Enter the key fob zone number (400-499 or 500-999).

Number of Buttons

Select the number of buttons (1, 2, or 4) on the key fob.

Name

📍 Displays if you are programming a key fob using zones 500-999

Enter the name of the key fob zone.

Username

📍 Displays if you are programming a key fob using zones 400-499

Select the username you want to associate with the key fob.

User Number

The user number is automatically generated once you select the username.

Serial Number

Enter the 8-digit serial number found on the key fob.

Supervision Time

📍 Displays if you are programming a key fob using zones 400-499

Enter the Supervision Time (0, 60, or 240) required for the key fob zone. The default is 0, which indicates an unsupervised transmitter.

The key fob automatically checks in at least once during this time or a missing condition is indicated for that zone.

When the panel is reset or a receiver is installed or powered down and powered up, the supervision timer restarts for all wireless zones.

Program Top, Bottom, Left, and Right Button Options

Action

Select one of the following button actions for an individual key fob button:

• Unused — Perform no action.

• Arming — Arm selected areas and force arm bad zones.

• Disarming — Disarm selected areas.

• Toggle Arm/Disarm — Toggle arm/disarm for selected areas and force arm bad zones when arming

• Status — Allow the key fob LED to indicate the arm/disarm status of the system

• Panic — Trigger a Panic zone type alarm with no restoral.

• Panic 2 Btn —Trigger a Panic zone type alarm with no restoral when pressed simultaneously with any other Panic 2 button. No action occurs when pressed alone.

• Emergency — Trigger an Emergency zone type alarm with no restoral.

• Emergency 2 Btn — Trigger an Emergency zone type alarm with no restoral when pressed simultaneously with any other Emergency 2 button. No action occurs when pressed alone.

• Output— Allows an output to turn on Steady, Pulse, Momentary, Toggle, or Off.

• Sensor — Allow panel to perform a standard Sensor Reset.

Press Time

Select the amount of time the user should press the button before the key fob sends a message to the receiver.

Short — Press the button for a 1/2 second to send the message to the receiver.

Long— Press the button for 2 seconds to send the message to the receiver.

Areas

Enter the area number that is armed or disarmed according to the key fob button programming.

To arm or disarm selected areas, the user’s Group assigned to the user number needs to have the same area numbers selected. Any area may be selected at Arm/Disarm Areas but only matching area numbers are armed or disarmed when the specific button is pressed.

When more areas are selected at Arm/Disarm Areas than are authorized in the user’s Group, the user can be given access authority to additional areas through the without requiring additional panel programming.

Output

📍 Displays if Action is Panic, Panic 2 Btn, Emergency, Emergency 2 Btn, or Output

Enter the Output to operate when the button is pressed.

Output Action

Select one of the following output actions for the selected output number:

• Off — The output is turned off. The output may turn off according to other programming, such as another button press, a zone action, or a schedule.

• Pulse — The output alternates 1 second on and 1 second off.

• Steady — The output turns on and remains on.

• Momentary — The output turns on once for 1 second.

• Toggle — The output alternates between the on state and off state. Each button press toggles the output state.